Avondale Fountain

Modern Fountain With Decorative Birds

Three decorative birds perch atop our Avondale Fountain adding a quaint feel to this modern, two plume water feature. This rectangular fountain creates a focal point for garden spaces and comes in a range of custom finishes. Also available without the birds, as our Lutea Fountain.

*As shown patina: Alpine Stone

Materials
Cast Stone

Capacity
This fountain holds approximately 15 gallons of water.

Avondale Fountain Tearsheet

Made in USA with 2 to 3 weeks lead time for delivery.
Manufactured with a high density cast stone mix that is long lasting and durable, making it a perfect choice for your unique garden decor.
Available in 12 standard patinas. Due to the hand application of the patina finish on each unique piece, the actual color may vary a bit, and the patina will continue to enhance with age in an outdoor setting.
Includes a variable speed pump kit with a 1 year warranty, all hardware, tubing and piping required to properly asssemble the fountain with full step by step directions.
No plumbing necessary. Fountain is self circulating.
We suggest that birdbath/fountain tops not be left outside in the winter. Once the top fills with water/snow and freezes, the top may crack. All birdbath/fountain bases, bench legs and statuary should be raised up off the ground in winter so they will not freeze to the ground surface. Ideally, a fountain should be stored indoors in the winter away from the elements. However, if a fountain bowl must be left outside, remove all pumps, rubber stoppers, drain pipes, finials and small components, and cover the top with burlap or any absorbent material (old blanket/towel) and then wrapped with dark plastic, making sure that water does not accumulate in the basin and freeze. Fountain pumps, finials, and other small components should be stored indoors. Check the fountain periodically to insure that the cover is secure and water is not accumulating in any fountain component.